The LED unit is less than 1 sq. in. x 0.5” deep. A drill template is provided for attaching the LED bezel unit to the panel.
Complete installation and electrical connection instructions are also provided.
|
| |
|
This low voltage annunciator activates when alternator output drops below
13.0 volts and will remain activated until normal output is restored. The
voltage drop could be the result of an alternator malfunction or an
overloaded system. Check by switching off a high load device, like landing
light or strobes. If the
ALT light goes off, the
alternator is not malfunctioning but you are sourcing more voltage from your
battery than the alternator is replacing. If the
ALT
light remains on, the alternator is malfunctioning and all non-essential
electrical systems should be shut down immediately to conserve remaining
battery voltage.
The LED unit is less than 1 sq. in. x 0.5” deep. A drill template is provided for attaching the LED bezel unit to the panel. Complete installation and electrical connection instructions are also provided.
| |
| Order Info | |
| Home | |